Software User's Guide Version 3.4

Index

Numerics
A B C D E F G H I K L M N O P Q R S T U V W X

Numerics

10/100 Ethernet configuration commands

accessing (3906)

10/100- Mbps ethernet network interface dynamic reconfiguration (3926)

10/100-Mbps Ethernet configuration commands

exit (3918)

ip-encapsulation (3912)

list (3914)

10/100-Mbps Ethernet monitoring commands (3924)

accessing (3920)

collisions (3922)

summary (3921)

accessing

change management

accessing (3338)

summary (3340)

protocol

configuration process (3255)

operating (monitor) process (3256)

second-level process (3218)

third-level process (3232)

accessing the mp configuration prompt (4397)

accessing the mp monitoring commands (4402)

activate

GWCON command (3548)

activating spare interfaces (3549)

add

add (4465)

BSC Relay configuration command (4506), (4508)

change management configuration command (3342)

CONFIG command (3438)

ELS configuration command (3663)

Frame Relay configuration command (4122)

SDLC configuration command (4450)

SDLC monitoring command (4464)

SDLC Relay configuration command (4411), (4413)

X.25 configuration command (3963)

XTP configuration command (4006)

XTP monitoring command (4022)

add device example

compression/encryption (CEA) adapter (3244)

multilink PPP (3242)

adding (3238)

compression/encryption (CEA) adapter

example (3243)

dial-in circuit

example (3239)

multilink PPP circuit

example (3241)

address wildcards, DTE (3990)

addresses

ISDN (4591)

advanced

ELS configuration command (3665)

ELS monitoring command (3727)

AppleTalk Control Protocol

for PPP (4282)

APPN HPR Control Protocol

for PPP (4310)

APPN ISR Control Protocol

for PPP (4313)

authentication

configuring PPP interface (4274)

remote device

configuring PPP interface to use (4276)

Auto-negotiation on the 10/100-Mbps Ethernet Interface (3897)

backup peer function, XTP (3993)

Backward Explicit Congestion Avoidance (4112)

Backward Explicit Congestion Notification (BECN)

Frame Relay (4065)

Banyan VINES Control Protocol (BVCP)

for PPP (4285)

basing configuration

on existing (3215)

baud rate, setting service port (3511)

bilateral closed user groups

overview (3937)

binary synchronous communications relay (BRLY)

considerations (4496)

overview (4486)

sample configuration (4494)

Binary Synchronous Relay--see BSC relay (4536)

boot

CONFIG command (3444)

Boot CONFIG

process

entering from CONFIG (3445)

Boot CONFIG commands

timedload (3363)

boot configuration database

displaying (3355)

Bridging Control Protocol (BCP)

for PPP (4288)

bridging, configuring using quick configuration (4671)

BSC interface

configuring (4500)

BSC interface configuration commands

list (4519)

set (4523)

BSC Relay

accessing monitoring environment (4524)

configuration

combination multipoint (4491)

physical multipoint (4489), (4492)

point-to-point (4488)

virtual multipoint (4490), (4493)

configuring (4498), (4499)

considerations (4497)

overview (4487)

sample configuration (4495)

BSC Relay configuration commands

add (4507)

delete (4510)

disable (4513)

enable (4516)

list (4520)

summary of (4501)

BSC relay dynamic reconfiguration (4535)

BSC Relay monitoring commands

clear-port-statistics (4527)

disable (4529)

enable (4531)

list (4533)

summary of (4525)

buffer

GWCON command (3552)

cable type, clocking and (3930)

call verification

ISDN (4597)

callback

dial circuit monitoring command (4666)

Callback Control Protocol (CBCP)

for PPP (4291)

calls

ISDN monitoring command (4634)

V.25 bis monitoring commands (4552)

V.34 monitoring command (4576)

change

CONFIG command (3447)

Frame Relay configuration command (4134)

X.25 configuration command (3965)

XTP configuration command (4008)

change management

accessing (3337)

commands available from (3339)

configuring (3336)

models (3331)

understanding (3330)

change management configuration commands

add (3341)

copy (3343)

describe (3345)

disable (3347)

enable (3349)

erase (3351)

list (3353)

lock (3357)

set (3359)

tftp (3361)

unlock (3365)

channels

ISDN monitoring command (4636)

CHAP

authentication for PPP (4272)

configuration (4332)

monitoring (4360)

CIR

monitoring (4100), (4104)

orphan permanent virtual circuit CIR (4085)

relationship to VIR (4101)

Circuit congestion (4102)

responding with throttle down (4103)

circuit contention

ISDN (4594)

Circuit Information Rate (CIR) (4084)

circuits

ISDN monitoring command (4638)

V.25 bis monitoring commands (4554)

V.34 monitoring commands (4578)

clear

BSC Relay monitoring command (4526)

CONFIG command (3453)

ELS configuration command (3667)

ELS monitoring command (3729)

Frame Relay monitoring command (4218)

GWCON command (3555)

PPP monitoring command (4361)

SDLC monitoring commands (4466)

clear-counters

LLC monitoring command (3889)

clear-port-statistics

SDLC Relay monitoring command (4431)

CLLM

description of (4081)

CLLM support (4113)

clock, setting and changing (3533)

clocking and cable type (3929)

closed user groups

configuring (3945)

cug 0 override (3943)

establishing X.25 circuits (3941)

extended

types of (3939)

overview (3935)

XTP support

overview (3998)

closing a telnet session (3328)

collisions

10/100-Mbps Ethernet monitoring command (3923)

command

exit (3205)

command history (3266), (3267)

commands

entering (3191)

service (SVC) (3376)

add (3378)

baudrate (3380)

bootmode (3382)

copy (3384)

debug (3386)

describe (3388)

dump (3390)

erase (3392)

interface (3394)

lock (3398)

reboot (3396), (3400)

set (3402)

tftp (3404)

unlock (3406)

vpd (3408)

writeboot (3410)

writeos (3412)

zmodem (3414)

Committed Burst Size

definition (4086)

relationship to maximum frame size (4087)

CONFIG commands

add (3437)

boot (3443)

change (3446)

clear (3452)

delete (3455)

disable (3461)

disable-completion (3465)

enable (3467)

Enable-completion (3470)

event (3472)

features (3475)

List (3484)

load (3491)

network (3493)

patch (3496)

protocol (3498)

qconfig (3505)

set (3507)

summary of (3436)

system retrieve (3528)

system view (3530)

time (3531)

unpatch (3537)

update (3539)

write (3542)

CONFIG process

accessing (3219)

commands available from (3435)

description of (3415)

entering (3220), (3433)

exiting (3434)

system dumps (3431)

Config-Only mode

description (3416)

entering automatically (3417)

manual entry (3418)

configuration

accessing the mp prompt (4399)

basing on existing (3212)

displaying information about (3559)

first (3210)

GWCON command (3558)

network interfaces (3248)

OPCON command (3237), (3276)

suggestions (3208)

updating (3213)

updating memory (3541)

configuration commands

GWCON prompt (3262)

multilink PPP protocol (mp) (4401)

set prompt-level

add prefix to hostname (3514)

Configurations That May Result in Link Activation Failure (3901)

Configurations That May Result in Mismatched Duplex Modes During Operation (3903)

configuring

DECnet (4692)

encryption (4356)

IP (4674)

IPX (4682)

multilink PPP interface (4384)

for multichassis MP (4394)

on dial circuits (4385)

on Layer-2-Tunneling nets (4391)

on serial links (4388)

OPCON (3269)

PPP callback (4278)

user access (3423)

virtual connections (VC) (4323)

XTP (4004)

configuring spare interfaces (3426)

activating (3550)

configuring (3427)

defining (3851)

restrictions (3429)

Configuring Values Other than Auto for Duplex (3899)

Congestion monitoring (4105)

Congestion notification and avoidance

Backward Explicit Congestion Avoidance (4110)

Forward Explicit Congestion Avoidance (4109)

connecting to a process (3193)

connection request timer (3995)

considerations

multilink PPP protocol (MP) (4378)

virtual connections (VC) (4320)

console

OPCON command (3278)

consolidated link layer management (CLLM)

description of (4080)

coprocessor

accessing configuration process (3236)

copy

change management configuration command (3344)

CPU

displaying memory usage of (3584)

create

ELS net filter configuration commands (3705)

ELS net filter monitoring commands (3784)

Data Link Connection Identifier (DLCI)

Frame Relay (4037), (4058)

date, setting and changing (3534)

DDN

default settings (4700)

DECnet Control Protocol (DNCP)

for PPP (4294)

DECnet, configuring (4693)

default

ELS configuration command (3669)

delete

BSC Relay configuration command (4509), (4511)

CONFIG command (3456)

delete (4469)

dial circuit configuration command (4658)

ELS configuration command (3671)

ELS net filter configuration commands (3707)

ELS net filter monitoring commands (3786)

ISDN (3459)

SDLC configuration command (4452)

SDLC monitoring command (4468)

SDLC Relay configuration command (4414), (4416)

X.25 configuration command (3967)

XTP configuration command (4010)

XTP monitoring command (4024)

deleting configuration information (3454)

describe

change management configuration command (3346)

description of OPCON (3271)

device

displaying time statistics about (3605)

exiting (3179)

OPCON command (3311)

rebooting (3307)

reloading (3176), (3222)

restart (3223)

restarting (3174)

device consoles

local (3161)

remote (3164)

using (3159)

device processes

attaching to (3319)

connecting to (3192)

displaying information about (3314)

device software

reloading (3308)

user interface (3160)

device, reloading (4697)

device, restarting (4695)

diags

OPCON command (3280)

dial circuit configuration commands

delete (4659)

dial circuits on leased lines (4656)

encapsulator (4661)

list (4663)

set (4665)

summary of (4655)

dial circuit monitoring commands

callback (4667)

dial circuits

adding (4539), (4563), (4605)

configuring (4540), (4564), (4606)

configuring for MP (4386)

ISDN (4590)

dial circuits on leased lines (4657)

dial-in circuit

add device example (3240)

dial-in circuits

virtual connections (VC) (4318)

configuring (4324)

considerations (4321)

disable

authentication protocols (4335)

BSC Relay configuration command (4512), (4514)

BSC Relay monitoring command (4528)

change management configuration command (3348)

CONFIG command (3462)

data compression (4334)

ELS net filter configuration commands (3709)

ELS net filter monitoring commands (3788)

Frame Relay configuration command

cir-monitor (4139)

Frame Relay monitoring command (4220)

GWCON command (3563)

ISDN configuration command (4613)

Lower DTR (4336)

multilink protocol (4333)

performance configuration command (3818)

performance monitoring command (3830)

SDLC configuration command (4454)

SDLC link establishment connection (4470)

SDLC Relay configuration command (4417), (4419)

SDLC Relay monitoring command (4433)

X.25 configuration command (3953)

XTP configuration command (4014)

disable-completion

CONFIG command (3466)

disk

GWCON command (3566)

display

ELS configuration command (3674)

ELS monitoring command (3731)

display hostname (3521)

display hostname software VPD (3525)

display hostname with carriage return (3526)

display hostname with changes (3522)

display hostname with date (3524)

display hostname with time (3523)

displaying

boot configuration database (3356)

divert

OPCON command (3282)

DLCI (Data Link Connection Identifier)

Frame Relay (4039)

DOS

assembling a load file (4703)

disassembling a load file (4709)

DTE address wildcards (3989)

dump

Token-Ring monitoring command (3872)

duplex

Ethernet configuration command (3911)

dynamic reconfiguration

10/100-Mbps ethernet network interface (3925)

BSC relay (4534)

frame relay (4252)

ISDN (4653)

PPP (4374)

SDLC relay (4439)

token-ring (3880)

V.34 (4585)

X.25 (3984)

XTP (4028)

dynamic routing

OSPF (4679)

RIP (4678)

ELS

els

capturing output using Telnet (3636)

concepts of (3619)

description of (3617)

entering (3474)

how to use (3634)

interpreting messages (3621)

message buffering

overview (3657)

monitoring (3659)

OPCON command (3285)

reloading (3761)

remote logging

additional considerations (3649)

duplicate logging (3653)

messages containing IP addresses (3651)

output (3647)

recurring sequence numbers (3655)

remote-logging (3696), (3767)

setting up traps (3637)

storing (3764)

tracing (3697), (3769)

trapping (3768), (3777)

troubleshooting example 1 (3639)

troubleshooting example 2 (3640)

troubleshooting example 3 (3641)

using to troubleshoot (3638)

ELS configuration

entering and exiting (3618)

ELS configuration commands

add (3662)

advanced (3664)

clear (3666)

default (3668)

delete (3670)

display (3673)

filter (3675)

list (3677)

message buffering (3714)

list (3716)

log (3718)

nolog (3720)

set (3722)

nodisplay (3679)

noremote (3682)

notrace (3685)

notrap (3687)

remote (3690)

set (3693)

summary of (3661)

trace (3772)

trap (3700)

ELS configuration environment

entering and exiting (3660)

ELS console environment

2212 remote logging

configuration (3646)

level

defined (3643)

remote logging (3642)

remote workstation

configuration (3645)

syslog facility

defined (3644)

ELS messages (3630)

enabling logging to a remote file (Remote) (3692), (3753)

explanation (3627)

groups (3632)

logging level (3626)

managing rotation (3635)

network information (3631)

suppressing display of (3681)

suppressing display of (nodisplay) (3740)

suppressing remote log (noremote) (3684), (3743)

suppressing tracing (3746)

suppressing trapping (3689), (3750)

suppressing trapping of (notrap) (3749)

trace (3698)

tracing (3774)

trapping (3699), (3778)

ELS monitoring commands

advanced (3726)

clear (3728)

display (3730)

files (3732)

filter (3734)

list (3736)

message buffering (3793)

flush (3795)

list (3797)

log (3799)

nolog (3801)

read-file (3803)

set (3805)

tftp (3807)

view (3809)

write-buffer (3811)

nodisplay (3738)

noremote (3741)

notrace (3744)

notrap (3747)

remote (3751)

remove (3754)

restore (3757)

retrieve (3759)

save (3762)

set (3765)

statistics (3770)

summary (3725)

trap (3775)

view (3779)

ELS net filter configuration commands

create (3704)

delete (3706)

disable (3708)

enable (3710)

list (3712)

overview (3702)

ELS net filter monitoring commands

create (3783)

delete (3785)

disable (3787)

enable (3789)

list (3791)

overview (3781)

ELS operating environment

entering and exiting (3724)

enable

authentication protocols (4339)

BSC Relay configuration command (4515), (4517)

BSC Relay monitoring command (4530)

change management configuration command (3350)

CHAP (4341)

CONFIG command (3468)

data compression (4338)

ELS net filter configuration commands (3711)

ELS net filter monitoring commands (3790)

Frame Relay configuration command (4157)

Frame Relay monitoring command (4225)

GWCON command (3569)

ISDN configuration command (4615)

Lower DTR (4342)

multilink protocol (4337)

PAP (4340)

performance configuration command (3820)

performance monitoring command (3832)

SDLC configuration command (4456)

SDLC monitoring command (4471)

SDLC Relay configuration command (4420), (4422)

SDLC Relay monitoring command (4435)

X.25 configuration command (3951)

XTP configuration command (4012)

enable lmi (4215)

Enable-completion

CONFIG command (3471)

encapsulation type (4691)

encapsulator

dial circuit configuration command (4660)

encryption

configuring (4357)

environment, lower level

exiting (3202)

erase

Change management configuration command (3352)

error

GWCON command (3571)

Ethernet

10/100-Mbps network interface

configuring (3905)

displaying statistics 10/100-Mbps (3896)

encapsulation type (4690)

encapsulation types for IPX (4689)

Ethernet 10/100-Mbps network interface

auto-negotiation on the 10/100-Mbps Ethernet Interface (3898)

using (3895)

Ethernet 10/100-Mbps network interface

Configurations That May Result in Link Activation Failure (3902)

Configurations That May Result in Mismatched Duplex Modes During Operation (3904)

configuring values other than Auto for duplex (3900)

Ethernet configuration commands

duplex (3910)

physical-address (3917)

summary (3909)

event

CONFIG command (3473)

GWCON command (3573)

OPCON command (3287)

event logging

subsystem (3623)

event number parameter (3625)

Events

Causes (3620)

Excess Burst Size

definition (4088)

setting for Frame Relay (4090)

exit (4504)

10/100-Mbps Ethernet configuration command (3919)

console command (4505)

exit command (3204)

exiting

lower level environments (3203)

exiting the device (3178)

features (3477)

accessing configuration and console processes (3253)

Bandwidth reservation (3482)

bandwidth reservation (3577)

CONFIG command (3476)

Encoding subsystem (3483)

GWCON command (3575)

MAC filtering (3479), (3578)

Thin server function (3481)

Voice adapter (3480)

WAN restoral (3576)

WAN restoral/reroute (3478)

files

ELS monitoring command (3733)

filter

ELS configuration command (3676)

ELS monitoring command (3735)

first

configuration (3211)

Flow control

packets (3553)

flush

OPCON command (3289)

Forward Explicit Congestion Avoidance (4111)

Forward Explicit Congestion Notification (FECN)

Frame Relay (4063)

frame handler PVCs

Frame Relay (4043)

Frame Relay (4046)

accessing configuration (4115)

Backward Explicit Congestion Notification (4064)

Bandwidth Reservation (4114)

circuit information rate (4083)

command/response (4060)

configuring (4116), (4119)

congestion notification and avoidance (4108)

Data Link Connection Identifier (DLCI) (4059)

data rates (4082)

discard eligibility (4066)

DLCI (Data Link Connection Identifier) (4038)

enabling PVC management (4117)

enabling SVC management (4118)

excess burst size (4089)

extended address (4061)

Forward Explicit Congestion Notification (4062)

frame format (4054)

frame forwarding described (4068)

frame handler PVCs (4044)

HDLC flags (4056)

interface initialization (4045)

introduction (4031)

LAPD datalink protocol (4035), (4055)

line speed (4092)

LMI management entities (4072)

management status reporting (4077)

description (4076)

full status report (4078)

link integrity verification report (4079)

maximum information rate (4095)

minimum information rate (4093)

multicast emulation (4070)

network (4036)

network interface (4120), (4251)

network management (4071)

orphan permanent virtual circuits (4048)

orphan switched virtual circuits (4050)

permanent virtual circuits (4047)

protocol address mapping (4069)

PVCs and (4052)

required groups (4053)

static ARP (4127)

subinterfaces (4041)

SVC

FRF 4 (4075)

user data (4067)

using (4030)

variable information rate (4097)

variable information rate (VIR) (4099)

virtual circuits (4033)

Frame Relay configuration commands (4138), (4156)

add (4123)

frame-handler-pvc (4124)

permanent-virtual-circuit (4125)

protocol-address (4126)

add protocol-address

IP protocol (4128)

add-protocol

AppleTalk2 protocol (4130)

DN protocol (4131)

IPX protocol (4129)

change (4133)

disable

cir-monitor (4140)

cllm (4141)

compression (4142)

congestion (4106)

congestion-monitor (4143)

dn-length-field (4144)

encryption (4145)

fragmentation (4146)

lmi (4147)

lower-dtr (4148)

multicast-emulation (4149)

no-pvc (4150)

notify-fecn-source (4151)

orphan-circuits (4152)

point-to-point (4153)

protocol-broadcast (4154)

throttle-transmit-on-fecn (4155)

enable

cir-monitor (4158)

cllm (4159)

compression (4160)

congestion (4107)

congestion-monitor (4161)

dn-length-field (4162), (4173)

encryption (4163), (4174)

lmi (4164)

lower-dtr (4165)

multicast-emulation (4166)

no-pvc (4168)

notify-fecn-source (4167)

orphan-circuits (4169)

point-to-point (4170)

protocol-broadcast (4171)

throttle-transmit-on-fecn (4172)

list

all (4176)

fragmentation-capable-pvcs (4177)

frame-handler-pvc (4178)

hdlc (4179)

interface (4180)

lmi (4181)

permanent-virtual-circuits (4182)

protocol-address (4183)

pvc-groups (4184)

queues (4238)

subinterfaces (4185)

llc (4189)

remove

frame-handler-pvc (4192)

permanent-virtual-circuit (4193)

protocol-address (4194)

remove protocol-address

Appletalk2 protocol (4197)

IP protocol (4195)

IPX protocol (4196)

remove-protocol

DN protocol (4198)

set

cable (4201)

clocking (4203)

default cir (4202)

frame-size (4204)

lmi-type (4205)

n1-parameter (4206)

n2-parameter (4207)

n3-parameter (4208)

p1-parameter (4209)

redials (4210)

t1-parameter (4211)

t2 parameter (4212)

transmit delay parameter (4213), (4214)

summary of (4121)

frame relay dynamic reconfiguration (4253)

Frame Relay Forum Implementation Agreement 4 (FRF 4) (4074)

Frame Relay frame handler pvc

changing (4135)

Frame Relay monitoring commands

clear (4217)

disable (4219)

cllm (4221)

notify-fecn-source (4222)

throttle-transmit-on-fecn (4223)

enable (4224)

cllm (4226)

notify-fecn-source (4227)

throttle-transmit-on-fecn (4228)

list (4229)

all (4231)

circuit (4232)

frame-handler-pvc (4233)

interface (4234)

lmi (4235)

permanent-virtual-circuits (4236)

pvc-groups (4237)

subinterfaces (4239)

llc (4244)

notrace (4246)

set (4247)

summary of (4216)

trace (4250)

Frame Relay permanent virtual circuits (PVC)

changing (4136)

Frame Relay queues

listing (4240)

Frame Relay switched virtual circuits (SVC) (4042)

adding (4132)

changing (4137)

listing (4186), (4187), (4241), (4242)

removing (4199)

getting help (3200), (4502)

group

deleting (3672)

group name parameter (3633)

GTE-Telenet

default settings (4699)

GWCON

commands

SDLC interface (4482)

X.25 interface (3981)

process

entering (3229)

GWCON commands

activate (3547)

buffer (3551)

clear (3554)

configuration (3557)

disable (3562)

disk (3565)

enable (3568)

error (3570)

event (3572)

features (3574)

interface (3579), (3845)

memory (3582)

network (3586)

protocol (3589)

queue (3592)

reset (3594)

statistics (3596)

summary of (3546)

test (3599)

uptime (3603)

GWCON process

description of (3544)

entering and exiting (3545)

halt

OPCON command (3292)

hard file

recovering from failure (3368)

HDLC flags

in Frame Relay frame (4057)

help

console command (3201), (4503)

how to list the protocols (3503)

I.430 switch variant (4607)

I.431 switch variant (4608)

IBM 2212

Config-Only mode (3419)

identifying prompts (3199)

image

loading at specific time (3334)

intercept

OPCON command (3295)

intercept character (3207)

changing (3296)

interface

GWCON command (3580)

list of processes (3189)

user (3184)

interface device

adding (3439)

changing (3448)

interfaces

configuring spare (3428)

spare (3852)

interfaces, restrictions (3430)

IP (Internet Protocol), configuring using quick configuration (4677)

IP Control Protocol (IPCP)

for PPP (4297)

IP monitoring commands

ping (3303)

IP, configuring (4675)

ip-encapsulation

10/100-Mbps Ethernet configuration command (3913)

IPv6 Control Protocol (IPv6CP)

for PPP (4301)

IPX (Internetwork Packet Exchange)

configuring using quick configuration (4685)

Ethernet encapsulation types (4688)

token ring encapsulation types (4686)

IPX Control Protocol (IPXCP)

for PPP (4304)

IPX, configuring (4683)

ISDN

accessing monitoring process (4632)

addresses (4592)

call verification (4596)

configuring (4604), (4610)

cost control over demand circuits (4595)

delete address (3458)

dial circuit contention (4593)

dial circuits (4589)

dynamic reconfiguration (4654)

GWCON commands (4652)

interface restrictions (4602)

overview (4588)

PPP configuration (4603)

requirements and restrictions (4599)

sample configurations (4598)

switches supported (4600), (4601)

ISDN configuration commands

disable (4612)

enable (4614)

list (4617)

modem (4619)

remove (4626)

set (4629)

set switch variant (4630)

summary of (4611)

ISDN interface

using (4587)

ISDN monitoring commands

calls (4635)

channels (4637)

circuits (4639)

L2_Counters (4641)

L3_Counters (4643)

modem (4645)

parameters (4649)

statistics (4651)

summary of (4633)

TEI (4647)

keepalive timer, setting for XTP (4018)

L2_Counters

ISDN monitoring command (4640)

L3_Counters

ISDN monitoring command (4642)

Layer 2 tunneling

relationship with multilink PPP (MP) (4383)

Layer 2 Tunneling nets

configuring for MP (4392)

Line Speed (4091)

Link Control Protocol (LCP)

packets (4266)

relationship to PPP (4264)

list (3258)

10/100-Mbps Ethernet configuration command (3915)

BSC interface configuration command (4518)

BSC Relay configuration command (4521)

BSC Relay monitoring command (4532)

change management configuration command (3354)

CONFIG command (3485)

dial circuit configuration command (4662)

ELS configuration command (3678)

ELS monitoring command (3737)

ELS net filter configuration commands (3713)

ELS net filter monitoring commands (3792)

Frame Relay configuration command (4175)

Frame Relay monitoring command (4230)

ISDN configuration command (4616)

list (4474)

LLC monitoring command (3891)

modem configuration command (4620)

performance configuration command (3822)

performance monitoring command (3834)

Point-to-Point configuration command (4343)

PPP monitoring command (4363)

SDLC configuration command (4458)

SDLC monitoring command (4473)

SDLC Relay configuration command (4423), (4426)

SDLC Relay monitoring command (4437)

Token-Ring configuration command (3856)

Token-Ring monitoring command (3874)

V.25 bis configuration command (4546)

V.34 configuration command (4570)

X.25 configuration command (3969)

X.25 monitoring command (3973)

XTP configuration command (4020)

XTP monitoring command (4026)

list devices command (3245), (3907), (4328), (4543), (4567)

listing the configuration (3502)

llc

Frame Relay configuration commands (4188), (4190)

Frame Relay monitoring commands (4243)

Point-to-Point configuration command (4348)

PPP configuration commands (4350)

PPP monitoring commands (4371), (4373)

Token-Ring configuration command (3858)

Token-Ring configuration commands (3860), (3878)

Token-Ring monitoring command (3876)

LLC configuration commands

accessing (3883)

list (3885)

set (3886)

summary (3884)

LLC monitoring commands

accessing (3887)

clear-counters (3890)

list (3892)

set (3894)

summary (3888)

LLC network interfaces

configuring (3882)

LMI management entities (4073)

load

CONFIG command (3492)

load file, router

assembling under DOS (4705)

assembling under UNIX (4708)

creating from multiple disks (4702)

disassembling under DOS (4711)

disassembling under UNIX (4714)

at specific time (3333)

local consoles (3163)

local terminals (3162)

local XTP

description (3996)

lock

change management configuration command (3358)

logging in

from local console (3171)

from remote console (3170)

remote login name (3169)

disabling (3463)

logout

OPCON command (3298)

maximum information rate

for frame relay (4096)

memory

displaying information about (3585)

erasing information (3756)

GWCON command (3583)

obtaining information about (3302)

OPCON command (3301)

message buffering

ELS configuration commands (3715)

list (3717)

log (3719)

nolog (3721)

set (3723)

ELS monitoring commands (3794)

flush (3796)

list (3798)

log (3800)

nolog (3802)

read-file (3804)

set (3806)

tftp (3808)

view (3810)

write-buffer (3812)

overview (3658)

messages

explanation (3628)

interpreting (3622)

receiving (3616)

messaging process

commands affecting (3609)

description of (3607)

entering and exiting (3613)

OPCON commands (3611)

receiving messages (3615)

minimum information rate

for frame relay (4094)

Modem

modem

disabling (3464), (3469)

ISDN configuration commands (4618)

ISDN monitoring command (4644)

modem configuration commands

list (4621)

reset-to-defaults (4625)

set (4623)

monitoring

accessing the mp commands (4404)

network interfaces (3252)

performance monitoring commands (3828)

monitoring commands

multilink ppp protocol (mp) (4406)

MONITR process

commands affecting (3608)

description of (3606)

entering and exiting (3612)

OPCON commands (3610)

receiving messages (3614)

MPPE options

listing (4346)

MS-CHAP

authentication for PPP (4273)

msgsz

SDLC monitoring command (4477)

multichassis MP (4382)

configuring (4395)

multilink PPP protocol (MP)

configuration commands (4400)

configuring

dial circuits (4387)

Layer 2 Tunneling nets (4393)

multichassis MP (4396)

serial links (4390)

considerations (4379)

monitoring commands (4405)

multichassis (4380)

overview (4377)

relationship with Layer 2 tunneling (4381)

multilink PPP protocol (mp) monitoring commands

accessing (4403)

multilink protocol (mp) configuration prompt

accessing (4398)

national disable

X.25 configuration command (3957)

national enable

X.25 configuration command (3955)

national personality, setting (4001)

national restore

X.25 configuration command (3961)

national set

X.25 configuration command (3959)

network

CONFIG command (3494)

environment (3495), (3588)

GWCON command (3587)

network command (3246), (3908), (4329), (4544), (4568)

Network Control Protocols (NCP)

for PPP interfaces (4280)

AppleTalk Control Protocol (4284)

APPN HPR Control Protocol (4312)

APPN ISR Control Protocol (4315)

Banyan VINES Control Protocol (BVCP) (4287)

Bridging Control Protocol (BCP) (4290)

Callback Control Protocol (CBCP) (4293)

DECnet Control Protocol (DNCP) (4296)

IP Control Protocol (IPCP) (4300)

IPv6 Control Protocol (IPv6CP) (4303)

IPX Control Protocol (IPXCP) (4306)

OSI Control Protocol (OSICP) (4309)

network interface

accessing configuration process (3235)

accessing console process (3250)

configuring (3234), (3839), (3842), (3848)

console process (3233), (3841), (3847)

deleting (3457)

disabling (3564)

displaying information about (3486), (3561), (3581)

displaying the configuration (3247)

enabling (3602)

GWCON interface command (3846)

monitoring (3251), (3840)

SDLC (4484)

supported interfaces (3249)

verifying (3601)

X.25 (3982)

network software

displaying statistical information about (3598)

nodisplay

ELS configuration command (3680)

ELS monitoring command (3739)

nonvolatile configuration memory

replacing (3449)

noremote

ELS configuration command (3683)

ELS monitoring command (3742)

notrace

ELS configuration command (3686)

ELS monitoring command (3745)

Frame Relay monitoring commands (4245)

notrap

ELS configuration command (3688)

ELS monitoring command (3748)

obtaining status of telnet session (3325)

online help (3264), (3265)

OPCON commands

configuration (3275)

console (3277)

diags (3279)

divert (3281)

els (3284)

event (3286)

flush (3288)

halt (3291)

intercept (3294)

logout (3297)

memory (3300)

reload (3305)

restart (3309)

status (3312)

summary of (3273)

suspend (3315)

talk (3317)

telnet (3320)

OPCON interface

configuring (3268)

OPCON process

accessing (3272)

commands available from (3274)

description (3270)

getting back to (3206)

summary (3182)

orphan permanent virtual circuits

Frame Relay (4049)

orphan switched virtual circuits

Frame Relay (4051)

OSI Control Protocol (OSICP)

for PPP (4307)

OSPF (4681)

output

discarding (3290)

sending to other consoles (3283)

suspending (3293)

overview

binary synchronous communications relay (BRLY) (4485)

ELS net filter configuration commands (3703)

ELS net filter monitoring commands (3782)

of software (3181)

virtual connections (VC) (4317)

packet completion codes (3629)

packet forwarder

entering CONFIG environment for (3500)

packet-size

Token-Ring configuration command (3861)

PAP authentication for PPP (4271)

parameter defaults

X.25 (3933)

parameters

configuring (3509)

event number (3624)

ISDN monitoring command (4648)

V.25 bis monitoring commands (4556)

V.34 monitoring commands (4580)

X.25 monitoring command (3975)

password, setting for user (3442)

passwords (3168)

patch

CONFIG command (3497)

perf command (3815)

performance

configuring (3813)

performance configuration commands

disable (3817)

enable (3819)

list (3821)

set (3823)

summary (3816)

performance monitoring commands

accessing (3825)

disable (3829)

enable (3831)

list (3833)

report (3835)

set (3837)

summary of (3827)

physical-address

Ethernet configuration command (3916)

pin parameter

setting (3695)

ping

IP monitoring command (3304)

Point-to-Point configuration commands

accessing (4330)

list (4344)

LLC (4349)

summary of (4331)

Point-to-Point interfaces

configuring (4325)

Point-to-Point network interface

using (4254)

Point-to-Point Protocol (PPP) (4298)

accessing the configuration process (4326)

address fields (4258)

AppleTalk Control Protocol (4283)

APPN HPR Control Protocol (4311)

APPN ISR Control Protocol (4314)

authentication (4270)

Banyan Vines Control Protocol (BVCP) (4286)

Bridging Control Protocol (BCP) (4289)

Callback Control Protocol (CBCP) (4292)

control field (4259)

DECnet Control Protocol (DNCP) (4295)

flag fields (4257)

frame check sequence field (4262)

frame structure (4256)

information field (4261)

IPv6 Control Protocol (IPv6CP) (4302)

IPX Control Protocol (IPXCP) (4305)

LCP packets (4265)

Link Control Protocol (LCP) (4263)

link establishment packets (4267)

link maintenance packets (4269)

link termination packets (4268)

Network Control Protocols (NCP) (4281)

OSI Control Protocol (OSICP) (4308)

overview (4255)

protocol field (4260)

Point-to-Point--see PPP (4376)

PPP

IP Control Protocol (IPCP) (4299)

PPP callback

configuring (4279)

PPP configuration commands

list

ccp (4345)

ecp (4347)

set (4352)

setting IPCP parameters (4353)

setting LCP parameters (4354)

PPP dynamic reconfiguration (4375)

PPP interface monitoring process

accessing (4358)

PPP monitoring commands

clear (4362)

list (4364)

dn (4368)

dncp (4367)

osi (4370)

osicp (4369)

listing IPCP parameters (4365)

listing LCP parameters (4366)

llc (4372)

summary of (4359)

process

second-level

accessing (3216)

sthird-level

accessing (3230)

processes

communicating with (3188)

list of (3187)

prompt-level

additional functions of

display hostname with carriage return (3520)

display hostname with changes (3516)

display hostname with date (3518)

display hostname with time (3517)

display hostname with VPD (3519)

configuration command

add prefix to hostname (3513)

display hostname (3515)

prompts

CONFIG (3197)

device processes (3194)

GWCON (3196)

identifying (3198)

OPCON (3195)

service (SVC)

accessing (3374)

description (3371)

protocol

CONFIG command (3499)

configuration process (3843), (3849)

console process (3844), (3850)

entering configuration process (3257)

GWCON command (3590)

protocol command (3259), (3263)

protocol console process

entering (3261)

protocols

configuration and console processes

accessing (3254)

configuring using quick configuration (4673)

console process (3228)

displaying information about (3560)

entering configuration environment for (3501)

entering console process (3260)

generating a list of (3504)

qconfig

CONFIG command (3506)

queue

GWCON command (3593)

Quick Config mode (3421)

manual entry (3422)

quick configuration (3190), (3221)

bridging configuration (4670)

description (3420)

protocol configuration

IP user interface (4676)

IPX user interface (4684)

procedure (4672)

Quick Configuration Reference (4668)

recovery

from hard file failure (3369)

Reload

reload

OPCON command (3227)

OPCON command (3306)

reloading (3224)

reloading the device (3175), (4696)

remote

ELS configuration command (3691)

ELS monitoring command (3752)

remote consoles (3165)

remote device

authentication

configuring PPP interface for (4275)

configuring PPP interface to use (4277)

remote DTE, searching for (3994)

remote logging

additional considerations (3650)

duplicate logging (3654)

messages containing IP addresses (3652)

recurring sequence numbers (3656)

output examples (3648)

remote login (3172)

remote terminals (3166)

remove

ELS monitoring command (3755)

Frame Relay configuration command (4191)

ISDN configuration command (4627)

report

performance monitoring command (3836)

reset

GWCON command (3595)

X.25 monitoring command (3977)

reset-to-default

modem configuration command (4624)

Restart

restart

OPCON command (3226)

OPCON command (3177), (3310)

restarting the device (3173), (3225), (4694)

restore

ELS monitoring command (3758)

retrieve

ELS monitoring command (3760)

RIP (4680)

router

displaying information about (3487)

router load file

assembling under DOS (4704)

assembling under UNIX (4707)

creating from multiple disks (4701)

disassembling under DOS (4710)

disassembling under UNIX (4713)

router software

communicating with (3591)

sample, quick configuration (4669)

save

ELS monitoring commands (3763)

SDLC

accessing configuration (4447)

configuration procedure (4442)

configuration requirements (4445)

configuring (4441), (4446)

network interface (4483)

switched call-in interface

configuring (4443)

SDLC configuration commands

add (4451)

delete (4453)

disable (4455)

enable (4457), (4472)

list (4459)

msgsz (4478)

set (4461)

summary of (4448)

SDLC connections

support for (4449)

SDLC monitoring commands

accessing (4462)

clear (4467)

link counters (4476)

list (4475)

summary of (4463)

SDLC Relay

accessing configuration (4409)

accessing monitoring environment (4429)

configuring (4407), (4408)

SDLC Relay configuration commands

add (4412)

delete (4415)

disable (4418)

enable (4421)

list (4424), (4425)

set (4428)

summary of (4410)

SDLC relay dynamic reconfiguration (4440)

SDLC Relay monitoring commands

clear-port-statistics (4432)

disable (4434)

enable (4436)

list (4438)

summary of (4430)

second-level

process

accessing (3217)

serial line interface

accessing the configuration process (3928)

serial line interfaces

configuring (3927)

serial PPP links

configuring for MP (4389)

service (SVC) prompt

accessing (3373)

description (3370)

service port baud rate, setting (3512)

service recovery function

accessing (3372)

using (3367)

service recovery functions

commands (3375)

add (3377)

baudrate (3379)

bootmode (3381)

copy (3383)

debug (3385)

describe (3387)

dump (3389)

erase (3391)

interface (3393)

lock (3397)

reboot (3395), (3399)

set (3401)

tftp (3403)

unlock (3405)

vpd (3407)

writeboot (3409)

writeos (3411)

zmodem (3413)

service-related files

listing, retrieving, and deleting (3567)

session

terminating (3299)

set

BSC interface configuration command (4522)

change management configuration command (3360)

CONFIG command (3508)

dial circuit configuration command (4664)

ELS configuration command (3694)

ELS monitoring command (3766)

Frame Relay configuration command (4200)

Frame Relay monitoring command (4248)

ISDN configuration commands (4628)

LLC monitoring command (3893)

modem configuration command (4622)

performance configuration command (3824)

performance monitoring command (3838)

PPP configuration command (4351)

SDLC configuration command (4460)

SDLC monitoring command (4479)

SDLC Relay configuration command (4427)

Token-Ring configuration command (3863)

V.25 bis configuration command (4548)

V.34 configuration command (4572)

X.25 configuration command (3949)

XTP configuration command (4016)

setting and changing time, date, and clock (3535)

setting service port baud rate (3510)

software

overview (3180)

user interface (3183)

source-routing

Token-Ring configuration command (3865)

speed

Token-Ring configuration command (3868)

statistics

clearing (3556)

ELS monitoring command (3771)

GWCON command (3597)

ISDN monitoring command (4650)

V.25 bis monitoring commands (4558)

V.34 monitoring commands (4582)

X.25 monitoring command (3979)

status

OPCON command (3313), (4327)

subinterfaces

Frame Relay (4040)

suggestions

configuration (3209)

suspend

OPCON commands (3316)

switch variant (4609)

setting for ISDN (4631)

switched SDLC call-in interface

configuring (4444)

system dumps, using (3432)

system retrieve

CONFIG command (3527)

system view

CONFIG command (3529)

talk

OPCON command (3318), (3814), (3826)

TCP/IP, transporting X.25 traffic over (3986)

TDM (time division multiplexing) (4032)

technical support access (3425)

TEI

ISDN monitoring command (4646)

telnet

closing a connection (3326)

obtaining status of Telnet session (3323)

OPCON command (3321)

quitting a session (3327)

telnet command (3322)

telnet connections (3167)

closing (3329)

obtaining status of (3324)

test

GWCON command (3600)

SDLC monitoring commands (4480)

test (4481)

TFTP

tftp

change management configuration command (3362)

description of

related to change management (3332)

third-level

process

accessing (3231)

time

activated load of image (3335)

CONFIG command (3532)

setting and changing (3536)

timedload

Boot CONFIG command (3364)

Tinygram compression (4355)

token ring

encapsulation types for IPX (4687)

Token-Ring configuration commands

accessing (3854)

enabling for LLC (3867)

list (3857)

LLC (3859)

llc (3877)

packet-size (3862)

set (3864)

source-routing (3866)

speed (3869)

summary of (3855)

token-ring dynamic reconfiguration (3881)

Token-Ring Interface

statistics displayed for (3879)

Token-Ring monitoring commands

accessing (3870)

dump (3873)

list (3875)

summary of (3871)

Token-Ring network interfaces

configuring (3853)

trace

ELS configuration commands (3773)

Frame Relay monitoring commands (4249)

trap

ELS configuration commands (3701)

ELS monitoring command (3776)

UNIX

assembling a load file (4706)

disassembling a load file (4712)

unlock

change management configuration command (3366)

unpatch

CONFIG command (3538)

update

CONFIG command (3540)

updating

configuration (3214)

uptime

GWCON command (3604)

user access

adding user (3440)

changing password (3450)

changing user (3451)

configuring (3424)

deleting user (3460)

listing user information (3488)

setting password (3441)

user interface

processes (3186)

software (3185)

V.25 bis

accessing configuration (4542)

accessing monitoring process (4550)

adding addresses (4538)

configuring (4537), (4541)

GWCON commands (4560)

V.25 bis configuration commands

list (4547)

set (4549)

summary of (4545)

V.25 bis monitoring commands

calls (4553)

circuits (4555)

parameters (4557)

statistics (4559)

summary of (4551)

V.32 dynamic reconfiguration (4586)

V.34

accessing configuration (4566)

accessing monitoring process (4574)

adding addresses (4562)

configuring (4561), (4565)

GWCON commands (4584)

V.34 configuration commands

list (4571)

set (4573)

summary of (4569)

V.34 monitoring commands

calls (4577)

circuits (4579)

parameters (4581)

statistics (4583)

summary of (4575)

V25bis address (3489)

V34 address (3490)

variable information rate

for frame relay (4098)

VCs

Frame Relay (4034)

view

ELS monitoring command (3780)

virtual connections (VC)

configuring (4322)

considerations (4319)

overview (4316)

wildcards, DTE address (3991)

write

CONFIG command (3543)

X.25

parameter defaults (3934)

X.25 configuration commands

add (3964)

change (3966)

delete (3968)

disable (3954)

enable (3952)

list (3970)

national disable (3958)

national enable (3956)

national restore (3962)

national set (3960)

set (3950)

summary of (3948)

X.25 dynamic reconfiguration (3985)

X.25 interfaces

bilateral closed user groups

overview (3938)

closed user groups

configuring (3946)

establishing circuits (3942)

extended types (3940)

overriding processing for cug 0 (3944)

overview (3936)

X.25 monitoring commands

list (3974)

parameters (3976)

reset (3978)

statistics (3980)

summary of (3972)

X.25 network interface

accessing the monitoring process (3971)

configuring (3947)

national personality (3932), (4698)

statistics (3983)

using (3931)

X.25 Transport Protocol (XTP) (3987) See also XTP

XTP

backup peer function (3992)

closed user groups

overview (3999)

configuration commands

Add (4007)

Change (4009)

Delete (4011)

Disable (4015)

Enable (4013)

List (4021)

Set (4017)

configuration procedures (4000)

configuring (4003)

configuring commands (4005)

local XTP

description (3997)

monitoring commands

Add (4023)

Delete (4025)

List (4027)

setting keepalive timer (4019)

setting natioinal personality (4002)

using (3988)

XTP dynamic reconfiguration (4029)

[ Top of Page | Previous Page | Table of Contents | Index ]